To top
Assistant

Your Assistant

The assistant creates a watch list with products and solutions you are interested in.
Do you have any questions or would you like to share these links with others? Just tick the check box and send it.



    ContactContact

    More countries

    Support RM 8841

    The support is intended for fastening the conveyors to the floor or lift floor. The support foot is infinitely adjustable. A simple height adjustment via threaded spindle can be ordered as an add-on.

    Ceiling Hanger RM 8842

    The ceiling hanger is used to mount the conveyors underneath the roof top. The hanger can be adjusted stageless with a threaded spindle in hight of  +/- 200 mm. 

    The Hanger is for one single level, the frame made from steel Ø40. 

    Switching-mode power supply unit HP5424

    The Interroll switching power supply HP5424 is a three-phase power supply for providing 24-V DC voltage.

    • The robust housing with protection rating of IP54. 
    • Allows very short lines which, in turn, lead to cost savings and error reduction with respect to voltage drops on the line. 
    • The HP5424 is operation ready, all required functions, such as circuit protection or maintenance switches, are already present.
    • High level of overload capability

    Switching-mode power supply unit HP5448

    The Interroll switching power supply HP5448 is a three-phase power supply for providing 48-V DC voltage.

    • The robust housing with protection rating of IP54. 
    • Allows very short lines which, in turn, lead to cost savings and error reduction with respect to voltage drops on the line. 
    • The HP5448 is operation ready, all required functions, such as circuit protection or maintenance switches, are already present.
    • High level of overload capability

     

    MultiControl AI

    The MultiControl AI is a multi-protocol-capable (PROFINET, EtherNet/IP and EtherCat can be used via simple switching) four-zone control for up to four RollerDrive EC5000 AI and four zone sensors. 

    • The use of Y-cables enables connecting four additional inputs or outputs.
    • Direct integration into the field bus level, no additional sensor/actuator level is needed. 
    • A standard flat cable is used for power supply and can simply be cut to the desired length.
    • Very quick connection by use of the piercing technology. 
    • The separate voltage supply line allows a safe power-off of the RollerDrive while the bus communication and sensors can continue to be used. 
    • Addressing and naming is done over PLC software, a web user interface, or with the Interroll teach-In method. 

    MultiControl BI

    The MultiControl BI is a multi-protocol-capable (PROFINET, EtherNet/IP and EtherCat can be used via simple switching) four-zone control for up to four RollerDrive EC5000 BI and four zone sensors. The bus interface allows to visualize the data and functions on the screen using the PLC or a web interface. As such, the current operating status, torque and temperature of each and every EC 5000 BI drive can be read out.

    • The use of Y-cables enables connecting four additional inputs or outputs.
    • Direct integration into the field bus level, no additional sensor/actuator level is needed. 
    • A standard flat cable is used for power supply and can simply be cut to the desired length.
    • Very quick connection by use of the piercing technology. 
    • The separate voltage supply line allows a safe power-off of the RollerDrive while the bus communication and sensors can continue to be used. 
    • Addressing and naming is done over PLC software, a web user interface, or with the Interroll teach-In method. 

    Sensor kit

    Sensors detect materials on the conveyors and determine their position. Reflex light barriers are used, which require a reflecting mirror (reflector) on the opposite side of the light barrier in order to return the light beam. The sensor kit consists of the sensor and the matching plastic housing, including fastening clip. The housing can be attached directly to the roller conveyor or to a universal support.

    Reflector kit

    The reflector kit returns the light beam back to the sensor. The kit includes a fastening clip and can be attached directly to the roller conveyor or to an universal support.

    Bracket Sensor / Reflector

    Universal support, fixed

    Side guides, sensors, reflectors and other add-on components, such as scanners, are attached to the fixed universal support. Fixed universal supports are attached directly to the side profile.

    Universal support, flexible

    Side guides, sensors, reflectors and other add-on components, such as scanners, are attached to the flexible universal support. Flexible universal supports are attached laterally to the profile. Each of these holders can accommodate two flexible universal support brackets.

    Side guide

    Side guides are used for reliably guiding the product on roller conveyors and belt conveyors, as well as on the corresponding components. We offer the side guides in an aluminum and a polymer version. In particular, because of the flexible material, the guides can be adjusted to the material flow in curves, as well as when merging and diverting.

    Side guide holder

    The side guide profile is attached to the universal support with the side guide holder.

    Side guide connector

    Side guides are connected to each other at the transition of two modules with the side guide connector.

    End cap for the side guide profile

    An end cap is attached to the end of a side guide. The contour prevents products from being caught.

    End cap for the side profile

    The end cap closes a side profile at the front.

    MSC 50, Magnetic speed controller

    The magnetic speed controller MSC 50 is a purely mechanical speed controller that ensures a controlled, slow speed on gravity conveyors with materials weighing from 0.5 kg (1 lbs) to a maximum of 35 kg (77 lbs). The magnetic speed controller operates without a gear box, thus enabling startup for very lightweight containers. Heavy containers are transported at a controlled speed thanks to the consistently high braking performance.

    MultiControl Y-cable

    The Y-Cable is used to connect further sensors or digital I/Os to the MultiControl.

    Impact protection

    The impact protection prevents collision damage on the conveyor line.

    End Stop

    The End Stop is a permanently mounted attachement of a conveyor line.

    Feeding Chute

    Feeding Chutes simplify and fasten the loading process on the conveyor line. The pallet is positioned more centered

    Running Boards

    Running boards can be mounted on a roller conveyor.

    Photocell Holder

    Sensor Holder MPP

    Driven Transmissions

    Driven transmissions are used in the transition of two chain conveyors and close the gap between the deflection rollers.

    Chain Conveyor Side Guide

    PowerBus 2

    PowerBus 2 is an additional power supply of the MultiControls "logic". In case of an emergency stop the PB2  powers the MultiControl so that it does not shut down, too.

    Sensor Set Type Var. 1

    Sensors and reflectors type Var. 1 are mounted on adjustable metal sheets on side guiding supports. They are used e.g. to detect conveying goods diagonal on a zone or merge.

    Sensor Set Type Var. 2

    Sensors and reflectors type Var. 2 are mounted on adjustable support stands. They are used e.g. to detect conveying goods diagonal on a zone or merge.

    Sensor Set Type Fix1

    Sensors and reflectors type Fix 1 are mounted on side profile and can be used e.g. as start or zone sensor 

    Support PM 9790

    The support is intended for fastening the conveyors to the floor or lift floor. The support foot is infinitely adjustable.