Roller Conveyors

Straight RM 8110

The non-powered straight roller conveyor transports materials either manually or via gravity down a slope and is used as an assembly ...

Curve RM 8120

The non-powered roller conveyor curve changes the transport direction of materials. Material is manually pushed around the curve. The ...

Ball Table RM 8130

The ball table transports materials with a solid bottom in any direction using very little force. It is especially suitable for ...

Omni Wheel Table RM 8140

The omni wheel table with multi-directional wheels is particularly well suited for workstation and inspection areas and for materials ...

Straight RM 8310

The 24 V roller conveyor enables zero pressure accumulation transport of unit loads with the help of a controller. Each zone is powered ...

Curve RM 8320

The 24 V roller conveyor curves change the direction of transport of the material. The conical rollers retain the alignment of the ...

Merge RM 8330

The merge merges two conveyor lines by placing products in the gaps in the material flow. Alternatively, the merge diverts products ...

Alignment Conveyor RM 8340

The 24 V alignment conveyor guides products diagonally to the transport direction to a side frame, and aligns them to the side guide if ...

Straight RM 8210 / 8212

The roller conveyor powered by 400 V is available in 2 operating modes.

The permanently powered flat belt conveyor RM 8210 serves as a ...

Curve RM 8220

The roller conveyor curves change the direction of transport of the material. The alignment of the material is maintained within the ...

Merge RM 8230

The merge is used for connecting lateral roller tracks at an angle (30° or 45°) to the main track. This can be used for moving material ...

Alignment Conveyor RM 8240

The alignment conveyor guides products diagonally to the transport direction to a side frame and aligns them to the side guide, if ...

RollerKit Light

The RollerKit Light is a universal conveyor system with flexible kits for curves and straight lines. The kits can be installed by the ...

Heavy Conveyors & Components

The Interroll Heavy range offers handling solutions for thetransportation of heavy goods on Euro, GKN Chep or industry specific pallets ...

Belt Conveyors

Straight BM 8350

The Belt Conveyor Light is a belt conveyor that is divided into zones and operates with zero pressure accumulation; its drive is based ...

Curve BM 8360

The Belt Curve Light is a belt curve that is divided into zones and operates with zero pressure accumulation; its drive is based on the ...

Straight Head Drive BM 8410 / 8420

The belt conveyor is used for the transport of unit loads that are not suitable for roller tracks, and for all types of unit loads in ...

Straight Center Drive BM 8411 / 8421

The belt conveyor is used for the transport of unit loads that are not suitable for roller tracks, and for all types of unit loads in ...

Straight Center Drive + Top Arch BM 8432 / 8442

The belt conveyor with top arch is used for transporting all types of unit loads in case of inclines or declines. The arch reduces ...

Straight Center Drive + Feed BM 8433 / 8443

The belt conveyor with feed is used for transporting all types of unit loads in case of inclines or declines. The feed enables a smooth ...

Straight Center Drive + Top Arch + Feed BM 8434 / 8444

The belt conveyor is used for transporting all types of unit loads in case of inclines and declines. Arch and feed allow a smooth and ...

Inclined or Declined Belt Curve BM 4308 / 4312

Our Belt Curves 4308 or 4312 are available both as inclined or declined curves. Now it is possible to bridge a difference of levels. ...

Strip Belt Merge BM 4430 / 4445

The belt merge is a belt conveyor with a 30° or 45° angled connecting edge. This conveyor element enables the merging of two conveyor ...

Key Products

RM 8711 Interroll High Performance Divert (HPD) 24 V Master

The High Performance Divert (HPD) is used for diverting unit loads, preferably with smooth bottom surfaces, at different angles onto a ...

Transfer RM 8731

The Transfer 24 V is used for diverting or merging onto a roller track suitable material at a 90° angle. In the process, the unit load ...

Lift-Up Gate RM 8830

The lift-up gate swivels upward to provide a walkway, or access from one side of the conveyor to the other. This allows access to the ...

End Stop RM 8811

The end stop is a permanently mounted attachment, for stopping and accumulating of approaching material. The end stop is used at the ...

Blade stop RM 8812

The Interroll blade stop is an electrically operated stop that is raised between the roller pitches in order to stop or accumulate ...

Lift RM 6006

The lifting station consists of a column construction and a carriage upon which a roller conveyor is mounted. A worm gear motor with ...

Lift RM 6008

This vertical conveyor consists of a column construction and a carriage upon which conveyor components can be mounted. Lifting motion ...

Pusher ST 6110

The pusher pushes materials away at a 90° angle to the conveying direction. This is done gently despite high speeds, thanks to the ...

Accessories

Magnetic Speed Controller MSC 50

The Magnetic Speed Controller 50 is a purely mechanical speed controller that ensures a controlled, slow speed on gravity conveyors ...

Actuator

By using 24 V actuators, a 400 V roller conveyor can be operated as a zone conveyor. The actuators can be controlled for zero pressure ...

Sorters

RM 8711 Interroll High Performance Divert (HPD) 24 V Master

The High Performance Divert (HPD) is used for diverting unit loads, preferably with smooth bottom surfaces, at different angles onto a ...

Transfer RM 8731

The Transfer 24 V is used for diverting or merging onto a roller track suitable material at a 90° angle. In the process, the unit load ...