Roller Conveyors

RM 8110 Straight

The non-powered straight roller conveyor transports materials either manually or via gravity down a slope and is used as an assembly ...

RM 8310 Straight

The 24 V roller conveyor enables zero pressure accumulation transport of unit loads with the help of a controller. Each zone is powered ...

RM 8320 Curve

The 24 V roller conveyor curves change the direction of transport of the material. The conical rollers retain the alignment of the ...

RM 8330 Merge

The merge merges two conveyor lines by placing products in the gaps in the material flow. Alternatively, the merge diverts products ...

RM 8340 Alignment Conveyor

The 24 V alignment conveyor guides products diagonally to the transport direction to a side frame, and aligns them to the side guide if ...

RM 8210 / 8212 Straight

The roller conveyor powered by 400 V is available in 2 operating modes.

The permanently powered flat belt conveyor RM 8210 serves as a ...

RM 8220 Curve

The roller conveyor curves change the direction of transport of the material. The alignment of the material is maintained within the ...

RM 8230 Merge

The merge is used for connecting lateral roller tracks at an angle (30° or 45°) to the main track. This can be used for moving material ...

RM 8240 Alignment Conveyor

The alignment conveyor guides products diagonally to the transport direction to a side frame and aligns them to the side guide, if ...

Heavy Conveyors & Components

The Interroll Heavy range offers handling solutions for thetransportation of heavy goods on Euro, GKN Chep or industry specific pallets ...

RM 8130 Ball Table

The ball table transports materials with a solid bottom in any direction using very little force. It is especially suitable for ...

RM 8140 Omni Wheel Table

The omni wheel table with multi-directional wheels is particularly well suited for workstation and inspection areas and for materials ...

Belt Conveyors

Interroll Portec Belt Curve

With a conveyor speed of more than 2 m/s, the Interroll Portec belt curve is designed for high performance and trouble-free operation ...

BM 8350 Straight

The Belt Conveyor Light is a belt conveyor that is divided into zones and operates with zero pressure accumulation; its drive is based ...

BM 8360 Curve

The Belt Curve Light is a belt curve that is divided into zones and operates with zero pressure accumulation; its drive is based on the ...

BM 8410 / 8420 Straight, Head Drive

The belt conveyor is used for the transport of unit loads that are not suitable for roller tracks, and for all types of unit loads in ...

BM 8411 / 8421 Straight, Center Drive

The belt conveyor is used for the transport of unit loads that are not suitable for roller tracks, and for all types of unit loads in ...

BM 8432 / 8442 Straight, Center Drive + Top Arch

The belt conveyor with top arch is used for transporting all types of unit loads in case of inclines or declines. The arch reduces ...

BM 8433 / 8443 Straight, Center Drive + Feed

The belt conveyor with feed is used for transporting all types of unit loads in case of inclines or declines. The feed enables a smooth ...

BM 8434 / 8444 Straight, Center Drive + Top Arch + Feed

The belt conveyor is used for transporting all types of unit loads in case of inclines and declines. Arch and feed allow a smooth and ...

Inclined or Declined Belt Curve BM 4308 / 4312

Our Belt Curves 4308 or 4312 are available both as inclined or declined curves. Now it is possible to bridge a difference of levels. ...

Strip Belt Merge BM 4430 / 4445

The belt merge is a belt conveyor with a 30° or 45° angled connecting edge. This conveyor element enables the merging of two conveyor ...

Interroll Portec Belt Curve

Key Products

RM 8711 Interroll High Performance Divert (HPD) 24 V Master

The High Performance Divert (HPD) is used for diverting unit loads, preferably with smooth bottom surfaces, at different angles onto a ...

Transfer RM 8731

The Transfer 24 V is used for diverting or merging onto a roller track suitable material at a 90° angle. In the process, the unit load ...

Lift RM 6006

The lifting station consists of a column construction and a carriage upon which a roller conveyor is mounted. A worm gear motor with ...

Lift-Up Gate RM 8830

The lift-up gate swivels upward to provide a walkway, or access from one side of the conveyor to the other. This allows access to the ...

End Stop RM 8811

The end stop is a permanently mounted attachment, for stopping and accumulating of approaching material. The end stop is used at the ...

Blade stop RM 8812

The Interroll blade stop is an electrically operated stop that is raised between the roller pitches in order to stop or accumulate ...

Lift RM 6008

This vertical conveyor consists of a column construction and a carriage upon which conveyor components can be mounted. Lifting motion ...

Pusher ST 6110

The push crank diverter pushes materials away at a 90° angle to the conveying direction. This is done gently despite high speeds, ...

Accessories

Magnetic Speed Controller MSC 50

The Magnetic Speed Controller 50 is a purely mechanical speed controller that ensures a controlled, slow speed on gravity conveyors ...

Actuator

By using 24 V actuators, a 400 V roller conveyor can be operated as a zone conveyor. The actuators can be controlled for zero pressure ...

Sorters

RM 8711 Interroll High Performance Divert (HPD) 24 V Master

The High Performance Divert (HPD) is used for diverting unit loads, preferably with smooth bottom surfaces, at different angles onto a ...

Transfer RM 8731

The Transfer 24 V is used for diverting or merging onto a roller track suitable material at a 90° angle. In the process, the unit load ...

Interroll Horizontal Crossbelt Sorter

Horizontal crossbelt sorters are characterized by their flexible, space-utilizing routing with curves that also conquer inclines and ...

Interroll Vertical Crossbelt Sorter

The main feature of Interroll's vertical crossbelt sorter with linear, straight routing ("above – below") is its distinctive ...