Lift RM 6006
The lifting station consists of a column construction and a carriage on which a roller conveyor is mounted. A worm gear motor with brake is used as drive unit to raise and
lower the carriage via a belt.
 |
|
Technical Data
|
| General technical data |
|
|
Max. load capacity
|
450 lb (200 kg)
|
|
Stroke velocity
|
20 to 120 ft/min (0.10 to 0.60 m/s)
|
|
Ambient temperature
|
+25 to +105 °F (-5 to +40 °C)
|
|
Max. stroke height
|
240″ (6,000 mm)
|
|
Start-up position
|
Min. 2
|
|
Lifting column
|
7″ x 3.15″ (200 mm x 80 mm) (Aluminum extrusion)
|
| Drive |
|
|
Motor type
|
Worm gear motor with brake, VFD mounted on gearmotor
|
|
Rated voltage
|
480 V / 60 Hz / 3 phase
|
|
Max. electrical power
|
3 HP / 2.2 kW
|
|
Drive medium
|
Belt
|
|
 |
|
Dimensions
| |
|
LW Clearance
|
12″ to 48″ (300 mm to 1200 mm) (when using Interroll modules)
|
|
FH1 Lower level dimension
|
Min. 12″ (300 mm)
|
|
FH2 Upper level dimension
|
FH1 + stroke height
|
|
GH Installed height
|
FH2 + 24″ (600 mm), max. 315″ (8000 mm)
|
|
BB Width of mounted conveyors
|
Max. 51″ (1300 mm)
|
|
GB Belt width
|
12″ / 16″ (300 mm / 400 mm)
|
Note: the upper part of the lifting station must be supported on-site above a construction height of 160″ (4000 mm).
|
Lift RM 6007
The lifting station consists of a column construction and a carriage on which a roller conveyor is mounted. The carriage is equipped with flanged rollers that are supported by
robust aluminium profiles in the frame construction. A cylinder pneumatically raises and lowers the lift truck.
 |
|
Technical Data
|
| General technical data |
|
|
Max. load capacity
|
350 lb (150 kg)
|
|
Stroke velocity
|
~40 ft/min (~0.20 m/s)
|
|
Ambient temperature
|
+25 to +105 °F (-5 to +40 °C)
|
|
Max. stroke height
|
40″ (1,000 mm)
|
|
Start-up position
|
Min. 2
|
|
Lifting column
|
7″ x 3.15″ (200 mm x 80 mm) (Aluminum extrusion)
|
| Drive |
|
|
Drive medium
|
Pneumatic cylinder (Festo manufacture)
|
|
Piston diameter
|
4″ (100 mm)
|
|
Air pressure
|
90 psi (6.0 bar)
|
|
 |
|
Dimensions
| |
|
LW Clearance
|
12″ to 48″ (310 mm to 1219.2 mm) (when using Interroll modules)
|
|
FH1 Lower level dimension
|
Min. 11.81″ (300 mm)
|
|
FH2 Upper level dimension
|
FH1 + stroke height
|
|
GH Installed height
|
FH2 + 24″ 600 mm
|
|
BB Width of mounted conveyors
|
Max. 51.18″ (1300 mm)
|
|
Lift RM 6008
This vertical conveyor consists of a column construction and a carriage upon which conveyor components can be mounted. Lifting motion is by two toothed belts. The drive is
located at the top.
 |
|
Technical Data
|
| General technical data |
|
|
Max. load capacity
|
450 lb (200 kg)
|
|
Stroke velocity
|
20 to 120 ft/min (0.10 to 1.0 m/s)
|
|
Ambient temperature
|
+25 to +105 °F (-5 to +40 °C)
|
|
Max. stroke height
|
450″ (11,000 mm)
|
|
Start-up position
|
Min. 2
|
|
Lifting column
|
7″ x 3.15″ (200 mm x 80 mm) (Aluminum extrusion)
|
| Drive |
|
|
Motor type
|
Worm gear motor with brake, VFD mounted on gearmotor
|
|
Rated voltage
|
480 V / 60 Hz / 3 phase
|
|
Max. electrical power
|
3 HP / 2.2 kW
|
|
Drive medium
|
Toothed belt
|
|
 |
|
Dimensions
| |
|
LW Clearance
|
12″ to 48″ (310 mm to 1200 mm) (when using Interroll modules)
|
|
FH1 Lower level dimension
|
Min. 20″ (500 mm)
|
|
FH2 Upper level dimension
|
FH1 + stroke height
|
|
GH Installed height
|
FH2 + 31.50″ (800 mm), max. 315″ (8000 mm)
|
|
BB Width of mounted conveyors
|
Max. 51″ (1300 mm)
|
Note: the upper part of the lifting station must be supported on-site above a construction height of 160″ (4000 mm).
|
|
