Stay connected

Chain Transfer RM 5711


A chain transfer transports heavy material or material that could damage a toothed belt drive onto a conveyor line at 90° or else removes it from a conveyor line. The chains are mounted between the rollers and are pneumatically raised for the diverting movement.
Chain Transfer RM 5711

Technical Data

General technical data
Max. load capacity 220 lb (100 kg)
Max. unit load weight 220 lb (100 kg)
Conveyor speed 40 to 120 ft/min (0.20 to 0.60 m/s)
Ambient temperature +40 to +125 °F (+5 to +50 °C)
Compressed air consumption 0.40 gal. (1.5 l) / cycle + 0.13 gal. (0.5 l) per cycle and per meter of Ø 0.31″ (8 mm) tube
Air pressure 70 psi (5.0 bar)
Inclined/declined Not suitable
Drive
Rated voltage 480 V / 60 Hz / 3 phase
Max. electrical power 0.11 kW
Drive medium Standard duplex chain 0.31″ (8 mm) type 05B-2
Protection rate IP54
Drive stroke
Drive medium Pneumatic cylinder
Piston diameter 2.5″ (63 mm)
Side frame
Combination of frame heights left/right 6″ / 3.15″ (150 mm / 80 mm)
4.75″ / 3.15″ (120 mm / 80 mm)
3.15″ / 3.15″ (80 mm / 80 mm)

Dimensions

Chain Transfer RM 5711

 Dimensions
LW Clearance 18″ to 40″ (460 mm to 1,010 mm)
P Min. roller pitch 3″ at Ø 1.9″ (75 mm at Ø 50 mm)
α Angle 90°
CC Outer belt - pitch 9″ to 31.5″ (225 mm to 800 mm)
ΔH Stroke 1″ (25 mm) (0.16″ (4 mm) below top of roller up to 0.8125″
(20.83 mm) above top of roller)
top
© Interroll | Sitemap | Disclaimer