Stay connected

Non-Driven Curve Roller Conveyor RM 5115


Non-driven roller conveyor curves change the direction of transport of material. Material is manually pushed around the curve. The alignment of the material is maintained within the side frames by tapered rollers.
Non-Driven Curve Roller Conveyor RM 5115

Technical Data

   
General technical data  
Max. load capacity per zone 75 lb/ft (100 kg/m)
Inclined/declined Not suitable
Ambient temperature +25 to +125 °F (-5 to +50 °C)
Roller  
Roller type Interroll Series 1700KXO
Roller diameter 1.9″
Roller material Steel, with grey tapered polypropylene sleeves
Max. number of rollers per conveyor/zone 12 at 60°
18 at 90°
 6 at 30°
 9 at 45°
Side frame
150 mm (6") Extrusion 6″ (150 mm) high,
2.6″ (65 mm) above top of roller
Combination of frame heights left/right 6″ / 6″ (150 mm / 150 mm)

Dimensions

Non-Driven Curve Roller Conveyor RM 5115
Dimensions  
LW Clearance 12″ to 40″ in 2″ increments
(310 mm to 1,010 mm in 50 mm increments)
TW Module width LW + 3.31″ (84 mm)
α Angle 30° / 45° / 60° / 90°
P Roller pitch, external ~0.003″ (~0.087 mm) x LW + Pi
Pi Roller pitch, internal ~2.83″ (~72 mm)
SP Side profile 6″ (150 mm)
SF Side guide 2.6″ (65 mm)

top
© Interroll | Sitemap | Disclaimer