The ball table enables material to be moved horizontally in any direction with very little force. It is especially suitable for workstation and inspection areas. The ball units
are fitted into a sub frame assembled to standard aluminium side profiles to allow the ball table section to be easily integrated into a conveyor system.
Technical Data
|
|
|
| General technical data |
|
|
Max. load capacity
|
75 lb/ft (100 kg/m)
|
|
Inclined/declined
|
Suitable for gradients
|
|
Ambient temperature
|
+25 to +125 °F (-5 to +50 °C)
|
| Side frame | |
|
150 mm (6") Extrusion
|
6″ (150 mm) high, 2.6″ (65 mm) above top of ball
|
|
80 mm (3.15") Extrusion
|
Allows lateral shifting
3.15″ (80 mm) high, 0.16″ (4 mm) below top of ball
|
|
Combination of frame heights left/right
|
6″ / 6″ (150 mm / 150 mm)
6″ / 3.15″ (150 mm / 80 mm)
3.15″ / 6″ (80 mm / 150 mm)
3.15″ / 3.15″ (80 mm / 80 mm)
|
Dimensions
| Dimensions |
|
|
LW Clearance
|
8″ to 40″ in 2″ increments
(210 mm to 1,010 mm in 50 mm increments)
|
|
ML Max. module length
|
120″ (3,000 mm)
|
|
TW Module width
|
LW + 3.31″ (84 mm)
|
|
P Roller pitch
|
2.95″ (75 mm)
|
|
SP Side profile
|
3.15″ / 6″ (80 mm / 150 mm)
|
|
SF Side guide
|
0.16″ / 26″ (4 mm / 65 mm)
|
|
