RollerDrive EC300

RollerDrive EC300 is the flag ship product complete line and it is unique in its performance density. With a mechanical performance of 44 Watts (EC300 13:1) and 52 Watts (EC300 7,85:1) there are high speed and high cycle applications possible.
Using a helical planetary steel/polymer gear box, the product achieves minimum operational life of 20.000 hour even under hardest conditions.

RollerDrive EC300

Characteristics
  • 44 Watts continuous mechanical performance (13:1)
  • 52 Watts continuous mechanical performance (7,85:1)
  • Integral commutation electronic
  • Constant conveyor speed
  • After run reducing motor stop function
  • 20.000 hours minimum operation time
  • Protection rate IP54
  • 55 dB(A) noise emission mounted in conveyor
  • 160 mm cable length
  • 5 pole Fixcon connector
 
The RollerDrive EC300 offers an array of pioneering features. As a result of this state-of-the-art functionality, possible overloads of the electronic circuitry and mechanical systems are a thing of the past. The lower risk of shutdown translates into higher efficiency levels for both product and process.

User Manual Interroll RollerDrive EC300

EC300 Electrical Data
Nominal voltage 24 VDC
Voltage range 18 - 28 VDC
No load current 0.4 A
Maximum continuous current 3.5 A (13:1) / 4 A (7.85:1)
Maximum peak current 5.5 A
Mechanical Performance 44 W (13:1) / 52 W (7.85:1)
Maximum ripple from power supply 3%
Noise emission (mounted) 50 dB(A)
Lifetime under nominal conditions 20000 h
System Efficiency (Drive)
 54 %

EC300 Speed/Load Performance Data

Gear Ratio Nominal Speed
m/s
 Nominal Torque
Nm
 Peak Torque
Nm
7.85 2-1.02
 0.70
 1
13
 1.27-0.12
 0.9
 1.6

Minimum RL

Cartridge Tube Idler bearing Min RL
7.85:1 and 13:1 No groove 11 mm hexagonal end drilled and tapped M8 224
No groove 11 mm hexagonal spring loaded 267
No groove PolyVee end drilled and tapped M8 249
No groove PolyVee 11 mm hexagonal spring loaded 260
No groove Timing belt/3/8" chain end drilled and tapped 241
Groove 30 60 11 mm hexagonal end drilled and tapped M8 267
Groove 50 80 11 mm hexagonal spring loaded 283
The minimum RL is determinate by the idler bearing and grooves. Maximum RL: 1500 mm.

DriveControl for EC300 RollerDrives
DC-EC200/300
Z-Card
                               

top
© Interroll | Disclaimer