Lift RM 6006
The lifting station consists of a column construction and a carriage on which a roller conveyor is mounted. A worm gear motor with brake is used as drive unit to raise and
lower the carriage via a belt.
 |
|
Technical Data
|
| General technical data |
|
|
Max. load capacity
|
200 kg
|
|
Stroke velocity
|
0.10 to 0.60 m/s
|
|
Ambient temperature
|
-5 to +40 °C
|
|
Max. stroke height
|
6,000 mm
|
|
Start-up position
|
Min. 2
|
|
Lifting column
|
200 x 80 mm (Aluminium profile)
|
| Drive |
|
|
Motor type
|
Worm gear motor with brake, frequency regulation on site
|
|
Rated voltage
|
400 V / 50 Hz / 3 phase
|
|
Max. electrical power
|
2.2 kW
|
|
Drive medium
|
Belt
|
|
 |
|
Dimensions
| |
|
LW Clearance
|
310 to 1,210 mm (when using Interroll modules)
|
|
FH1 Lower level dimension
|
Min. 300 mm
|
|
FH2 Upper level dimension
|
FH1 + stroke height
|
|
GH Installed height
|
FH2 + 600 mm (max. 8,000 mm)
|
|
BB Width of mounted conveyors
|
Max. 1,300 mm
|
|
GB Belt width
|
300 / 400 mm
|
Note: the upper part of the lifting station must be supported on-site above a construction height of 4,000 mm.
|
Lift RM 6007
The lifting station consists of a column construction and a carriage on which a roller conveyor is mounted. The carriage is equipped with flanged rollers that are supported by
robust aluminium profiles in the frame construction. A cylinder pneumatically raises and lowers the lift truck.
 |
|
Technical Data
|
| General technical data |
|
|
Max. load capacity
|
150 kg
|
|
Stroke velocity
|
~0.20 m/s
|
|
Ambient temperature
|
-5 to +40 °C
|
|
Max. stroke height
|
1,000 mm
|
|
Start-up position
|
Min. 2
|
|
Lifting column
|
200 x 80 mm (Aluminium profile)
|
| Drive |
|
|
Drive medium
|
Pneumatic cylinder (Manufacturer: Festo)
|
|
Piston diameter
|
100 mm
|
|
Air pressure
|
6.0 bar
|
|
 |
|
Dimensions
| |
|
LW Clearance
|
310 to 1,210 mm (when using Interroll modules)
|
|
FH1 Lower level dimension
|
Min. 300 mm
|
|
FH2 Upper level dimension
|
FH1 + stroke height
|
|
GH Installed height
|
FH2 + 600 mm
|
|
BB Width of mounted conveyors
|
Max. 1,300 mm
|
|
Lift RM 6008
This vertical conveyor consists of a column construction and a carriage upon which conveyor components can be mounted. Lifting motion is by two toothed belts. The drive is
located at the top.
 |
|
Technical Data
|
| General technical data |
|
|
Max. load capacity
|
200 kg
|
|
Stroke velocity
|
0.10 to 1.0 m/s
|
|
Ambient temperature
|
-5 to +40 °C
|
|
Max. stroke height
|
11,000 mm
|
|
Start-up position
|
Min. 2
|
|
Lifting column
|
200 x 80 mm (Aluminium profile)
|
| Drive |
|
|
Motor type
|
Worm gear motor with brake, frequency regulation on site
|
|
Rated voltage
|
400 V / 50 Hz / 3 phase
|
|
Max. electrical power
|
2.2 kW
|
|
Drive medium
|
Toothed belt
|
|
 |
|
Dimensions
| |
|
LW Clearance
|
310 to 1,210 mm (when using Interroll modules)
|
|
FH1 Lower level dimension
|
Min. 500 mm
|
|
FH2 Upper level dimension
|
FH1 + stroke height
|
|
GH Installed height
|
FH2 + 800 mm (max. 12,000 mm)
|
|
BB Width of mounted conveyors
|
Max. 1,300 mm
|
Note: the upper part of the lifting station must be supported on-site above a construction height of 4,000 mm.
|
|
