Stay connected

Belt Transfer RM 5710


A toothed belt transfer direction of transport by 90°. Pneumatically raised toothed belts mounted between the conveyor rollers transport material into the adjacent conveyor line or else remove it from the conveyor line.
Belt Transfer RM 5710
 

Technical Data

   
General technical data  
Max. load capacity (additional) 30 kg with 2 toothed belts
40 kg with 3 toothed belts
50 kg with 4 toothed belts
Max. unit load weight 50 kg
Conveyor speed 0.20 to 0.60 m/s
Ambient temperature +5 to +50 °C
Compressed air consumption 1.5 l / cycle + 0.5 l per cycle and per metre of Ø 8 mm tube
Air pressure 5.0 bar
Inclined/declined Not suitable
Drive  
Rated voltage 400 V / 50 Hz / 3 phase
Max. electrical power 0.11 kW
Drive medium Toothed belt T5
Protection rate IP54
Drive stroke  
Drive medium Pneumatic cylinder
Piston diameter 63 mm
Side profile  
Combination of profile heights left/right 150/80
120/80
80/80

Dimensions

Belt Transfer RM 5710

 Dimensions  
LW Clearance 460 to 1,010 mm
P Min. roller pitch 75 mm
α Angle 90°
CC Outer belt - pitch 225 to 800 mm
ΔH Stroke 25 mm (5 mm below top edge of roller to 20 mm above top edge of roller)
top
© Interroll | Sitemap | Disclaimer