Stay connected

Driveshaft Conveyor Curve RM 5621


The roller conveyor curves change the direction of transport of material. The alignment of the material is maintained within the side frames by tapered rollers. The rollers are driven from a horizontal shaft.

Driveshaft Conveyor Curve RM 5621

Technical Data

   
General technical data  
Max. load capacity per zone 75 kg/m
Conveyor speed 0.2 to 0.6 m/s
Inclined/declined Not suitable
Ambient temperature +5 to +40 °C
Roller  
Roller type Interroll Series 1700KXO
Roller diameter 50 mm
Roller material Steel, with grey tapered polypropylene sleeves
Max. number of rollers per conveyor/zone 12 at 60°
18 at 90°
 6 at 30°
 9 at 45°
Drive
Rated voltage 400 V / 50 Hz / 3 phase
Max. electrical power per zone 0.37 kW
Drive medium PU round belt ø 5 mm
Torque transmission Round belt from shaft to roller
Side profile
Profile 150 150 mm high
65 mm above top edge of roller
Combination of profile heights left/right 150/150

Dimensions

Driveshaft Conveyor Curve RM 5621
Dimensions  
LW Clearance 310 to 1,010 mm in 50 mm increments
TW Module width LW + 84 mm
α Angle 30° / 45° / 60° / 90°
P Roller pitch, external ~(0.087 mm x LW) + Pi
Pi Roller pitch, internal ~72 mm
SP Side profile 150 mm
SF Side guide 65 mm

top
© Interroll | Sitemap | Disclaimer