Rollers series 3500 are based on the universal roller series 1700, e.g. roller housings of the roller series 1700 are to be found on the non-driven side. The drive elements are
optionally available in plastic (Sprockets - Polyamid 6.6, Toothed pinion - POM) or steel. Sprockets made of plastic are non-abrasive, tough elastic and noise damping. Steel
sprockets welded to the roller tube are precision turned machined achieving accurate concentricity in service. Load capacity: up to 2000 N.
Fixed Drive Conveyor Roller Series 3500
Max. Speed
▪ 1,2 m/s
Load capacity
▪ Up to 2,000 N
Dimensions Tube
▪ Highly impact-resistant special PVC-Copolymer in stone grey (RAL 7030) with an outside diameter of 50 or 63 mm
▪ Zinc plated steel to DIN 2394 with an outside diameter of 50 or 60 mm
▪ Stainless steel to DIN 2463 with an outside diameter of 50 or 60 mm
▪ Aluminium with an outside diameter of 50 mm
Spindle
▪ Bright steel or stainless steel
▪ Female threaded spindle (M8 x 15), diameter 12 or 14 mm
▪ Other spindle ends available on request
Bearing
▪ Bearing housing made of polyamide (black)
▪ Bearing seal made of polyamide (yellow) for the drive end and polypropylene for the non-drive end
▪ Types of bearing:
- Interroll ball bearing
- Interroll stainless steel ball bearing
- Precision ball bearings 6002 , 6002 2RS
Chain drive element
▪ Single or double sprocket head made of high-quality polyamide 6.6 or steel
▪ Dimensions: 1/2" x 5/16"
▪ Numbers of teeth: 9, 11 or 14
Toothed belt drive element
▪ Toothed belt head made of POM
▪ Dimensions:
- Toothed belt pitch: 8 mm
- Toothed belt width: 11.2 mm
- Number of teeth: 18 for Interroll special toothed belt
Options
▪ Flanges
▪ Elastic PVC sleeve
▪ Antistatic version
