The belt merge is a belt conveyor with angled connecting edge of 30° or 45°. This conveyor element enables the merging of two conveyor lines according to the specific
angle. With the use of supplementary sorting elements, belt merges also enable the separation of conveyor flows. The conveying belt is available for especially small material
units in widths of 100 mm and 50 mm. The belt merge with 120 mm has an especially low installation height.
Technical Data
| General technical data |
|
|
Max. load capacity
|
50 kg/m
|
|
Max. load capacity per module
|
100 kg
|
|
Conveyor speed
|
0.10 to 3.50 m/s
|
|
Inclined/declined
|
Not suitable
|
|
Ambient temperature
|
-5 to +40 °C
|
| Drive |
|
|
Rated voltage
|
400 V / 50 Hz / 3 phase
460 V / 60 Hz / 3 phase
|
|
Electrical power
|
0.37 to 31.10 kW
|
|
Motor type
|
Gear motor
|
|
Diameter of drive roller
|
80 / 120 mm
|
|
Diameter of return roller, straight side
|
80 / 120 mm
|
|
Diameter of return roller, angled side
|
70 mm
|
| Materials |
|
|
Belt
|
Textured surface
Flame resistant in compliance with DIN EN 20340 (optional)
Other surfaces on request
Belt width 100 mm (50 mm on request)
|
|
Slider bed
|
Plastic slide profiles
|
| Side profile |
|
|
Height of side guide
|
120 mm
Other side guides on request
|
Dimensions
|
Dimensions
|
|
|
α Angle
|
30° / 45°
|
|
LW Clearance
|
410 to 1,010 mm in 50 mm increments
|
|
T.O.B. Conveying height
|
Max. 1,800 mm
Other dimensions on request
|
|
GH Installed height
|
200 mm
|
|
