The belt merge is a belt conveyor with angled connecting edge of 30° or 45°. This conveyor element enables the merging of two conveyor lines according to the specific
angle. With use of supplementary sorting elements, belt merges also enable the separation of conveyor flows. The closed belt surface transports the material smoothly.
Technical Data
| General technical data |
|
|
Max. load capacity
|
50 kg/m
|
|
Max. load capacity per module
|
100 kg
|
|
Conveyor speed
|
0.10 to 2.50 m/s
|
|
Inclined/declined
|
Not suitable
|
|
Ambient temperature
|
-5 to +40 °C
|
| Drive |
|
|
Rated voltage
|
400 V / 50 Hz / 3 phase
|
|
Electrical power
|
1.10 to 3.00 kW
|
|
Motor type
|
Gear motor
|
|
Diameter of drive roller
|
Secondary friction wheel, 226 mm
|
|
Diameter of return roller, straight side
|
80 mm
|
|
Diameter of return roller, angled side
|
60 mm
|
| Materials |
|
|
Belt
|
Textured surface
Flame resistant in compliance with DIN EN 20340 (optional)
Other surfaces on request
|
|
Slider bed
|
Sheet steel, 3 mm
|
| Side profile |
|
|
Height of side guide
|
120 mm
Other side guides on request
|
Dimensions
|
Dimensions
|
|
|
α Angle
|
30° / 45°
|
|
LW Clearance
|
310 to 1,010 mm in 50 mm increments
|
|
T.O.B. Conveying height
|
Max. 1,800 mm
Other dimensions on request
|
|
GH Installed height
|
500 mm
|
|
