Belt Curve Table Type 4380/4390/4391


180° curve tables are used wherever the material flow of conveyed goods must be reversed in a defined direction within a very small space. Due to the small curve table radius, commissioning conveyors can be installed directly parallel to one another when space is limited. High-volume flow rates are achieved thanks to a continuous transport goods.
Belt Curve Table

Belt Curve Table

 These belt curve tables have the same positive drive with teeth connected to the belt as our belt curves type 4308 and 4312, so that even heavy unit loads can be transported safely.
Cylindrical drive and transfer rollers allow for a trouble free transfer from or to other conveyors.
The curve table is available totally without an inner radius, or with a small inner radius, depending on the application. Our curve type 4380 is designed with a single continuous belt, thus without an inner radius.
Our belt curves type 4390/4391 are curves with an inner radius, which provides extra stability, especially with outside radiuses beyond 1500 mm.

Accessories:
  • Flame resistent belts
  • High temperature belts
  • Belts for food industry
  • Variable speed due to electronic frequency control
  • Gear motors 400 V/50 Hz or 460 V/60 Hz
  • Supports with track rollers
  • Protective motor switch with wires and CEE-plugs
  • Side guides as per your specifications



Technical Data: Curve without inner Radius: Curve with inner Radius:
Conveying angle 180° 180°
Lane Diameter (LD): 600 mm - 1500 mm
Inner Radius (IR):
Type 4390: 200mm
Type 4391: 300mm
Lane Widths (LW):
Type 4390: 310 mm to 810 mm
Type 4391: 500 mm to 1500 mm
Direction of Travel (D.O.T.) RH - clockwise
LH - anti clockwise 		RH - clockwise
LH - anti clockwise
Height (T.O.B.) for supports: up to 2 m ± 50 mm up to 2 m ± 50 mm
Speed (V) at centerline: 0.1 m/s to 1.0 m/s 0.1 m/s to 1.0 m/s
Load Range: to 300 N/m (30 kg/m) max. 50 kg/Curve Type 4390: to 300 N/m (30 kg/m) max. 50 kg/Curve
Type 4391: to 500 N/m (50 kg/m) max. 100 kg/Curve
Side Guides: 120 mm Type 4390: 120mm
Type 4391: 150mm or 300mm
Motor Drive: Gear Motor 0.37 to 1.5 kW, 400 V/50 Hz, 460 V/60 Hz Type 4390: Gear Motor 0.37 to 1.5kW, 400V/50Hz, 460V/60Hz
Type 4391: Gear Motor 0.55 to 3kW, 400V/50Hz, 460V/60Hz
Drive Shaft (DS): Ø 25 mm Type 4390: Ø 25mm
Type 4391: Ø 30mm(Ø 35mm)
Belting: Twin-laminate polyester, covered with PVC-structure (Other types available) Twin-laminate polyester, covered with PVC-structure (Other types available)
Temperature Range: -5°C to 50°C Ambient -5°C to 50°C Ambient


top

© Interroll | Disclaimer