The new Interroll Belt Curve BC 4608 not only excels with its slimmer, space-saving design but also with a construction which reduces belt tension and consequently lengthens
belt lifetimes significantly. If, however, the belt has to be exchanged, this too is an easy matter. Moreover, noise emissions have been reduced.
| 
| Less tension, higher lifetime
Conventional curves are constructed using tapered drive rollers to drive the belt. The consequence: The Belt-Guiding wears faster.
The positive drive principle allows lower Belt Tension and the usage of cylindrical return rollers. Life-time is increased and gaps to adjacent conveyors are minimized.
The belt is driven via a toothed profile, integrated on the outer edge.
-
Low overall height: H = 155 mm
-
Cylindrical return rollers: D = 100 mm
-
Speeds: v = 0.1 - 2.5 m/s
-
Transporting loads: up to 50 kg/m
-
Conveyed goods: especially for mixed unit loads of different shapes and sizes. Parcels, bags, pouches, baggage... and for very small items thanks to cylindrical return rollers
-
Angles: 30°, 45°, 60°, 90°, 180°
-
Effective width: up to 1500 mm
-
Easy to combine with all standard materials handling equipment
-
Ease of maintenance was a design priority for this outstanding belt curve
-
Low noise: noise emissions of <= 64 dB(A)
-
Smooth and aesthetic design, without protruding edges
-
Easy tracking thanks to the positive driving system
|
| |
Technical Data: BC 4608
|
General technical data
|
|
Max. load capacity
|
50 kg/m
|
|
Max. load capacity per module
|
100 kg
|
|
Conveyor speed
|
0.10 to 2.50 m/s
|
|
Inclined/declined
|
Not suitable
|
|
Ambient temperature
|
-5 to +40 °C
|
Drive
|
|
Rated voltage
|
400 V / 50 Hz / 3 phase
460 V / 60 Hz / 3 phase
|
|
Electrical power
|
0.37 to 2.20 kW
|
|
Motor type
|
Gear motor
|
|
Diameter of drive roller
|
100 mm (cylindrical)
|
|
Diameter of defl ection roller
|
100 mm (cylindrical)
|
Materials
|
Belt
|
Textured surface
Flame resistant in compliance with DIN EN 20340 (optional)
Other surfaces on request
|
Slider bed
|
Polymer-coated timber panel
Sheet steel, 3 mm (optional)
|
Side profile
|
Height of side guide
|
120 mm
Other side guides on request
|
|
|
