Because of its strength, reliability and zero maintenance, this product, has been for many years widely accepted in supermarket checkout conveyors, packaging machines and
within distribution and automation industries. Drum motor type 80s with a crowned shell diameter of only 81.5 mm, and a minimum Roller Length (RL) of 270 mm producing a belt pull
of up to 531 N is the perfect solution for such applications.
| 
|
With 17 different nominal speed options and an extraordinary low noise performance the drum motor 80s suits the requirements within automated assembly lines and wherever operators
are working next to the conveyor lines.
All version of drum motor 80s has stan - dard IP 66 enclosure and is available in complete stainless steel execution for wash down applications.
|
80s - Specification of standard drum motor
-
Crowned 81.5 mm diameter mild steel shell treated with anti-rust oil
-
Die cast aluminium bearing housings
-
Die cast aluminium shaft end caps
-
3-phase motor with thermal protector
-
AC induction motor with motor winding insulation class F
-
Triple shaft sealing system - degree of protection IP 66 (EN 60034-5)
-
Voltages: Most common voltages available
-
3-phase induction motor with one rated voltage - either low or high voltage
-
Available for 50 & 60 Hz supply
-
Cable outlet designed for straight or angle connection
-
Cable length minimum 1.10 m outside shaft
-
Lifetime lubricated for maintenance free operation
-
Up to 10 start/stop per minute - higher cycle times available on request
-
Maximum RL 962 mm (longer RL on request)
-
Non standard RL lengths available
-
No maintenance
-
No oil change
TS - Food grade technical specification for drum motor 80s
-
Shell in stainless steel - AISI 304
-
Max RL 962 mm
-
Stainless steel covered housings - AISI 304 -
-
Shaft end caps in stainless steel - AISI 304
-
Protection IP 66 (EN 60034-5)
-
Straight cable outlet with O-ring seal
-
FDA & USDA food grade approved oil and grease
Type
|
A mm
|
B mm
|
C mm
|
D mm
|
E mm
|
F mm
|
G mm
|
H mm
|
K mm
|
L mm
|
M mm
|
N mm
|
R mm
|
T mm
|
EL mm
|
AGL mm
|
80s standard /TS/RL 270-612
|
81.5
|
80
|
20
|
35
|
45
|
21
|
3
|
|
|
|
|
|
|
|
RL+6
|
RL+46
|
80s standard /TS/RL > 612-962
|
83
|
81
|
20
|
35
|
45
|
21
|
3
|
|
|
|
|
|
|
|
RL+6
|
RL+46
|
80s cylindrical /TS/RL 270-612
|
80.5
|
80.5
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
80s cylindrical /TS/RL > 612-962
|
83
|
83
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
80s standard /TS/RL Terminal Box
|
|
|
|
|
|
|
|
|
18
|
41
|
24
|
95
|
25
|
14
|
|
|
Idler Pulley 80s
|
81.5
|
80
|
20
|
35
|
45
|
21
|
3
|
|
|
|
|
|
|
|
RL+6
|
RL+46
|
|
